方言唠明白！富美家抗倍特板与二代板，差别堪比奥迪和奥拓

　　Speak the dialect clearly! The difference between Fumeijia's anti duplication special board and second-generation board is comparable to Audi and Alto

　　哈喽大家，上期视频咱跟大家聊了富美家抗倍特板和二代板的区别，好多朋友说还是没分清、没听透。今儿个咱不玩虚的，就用咱接地气的方言，再给大家好好唠唠这俩板儿，尤其是做公共卫生间隔断的朋友，可千万别听混、买错了，不然用不了多久就出毛病，既费钱又费心，得不偿失。

　　Hello everyone, in the previous video, we talked about the difference between Fumeijia's anti duplication special board and second-generation board. Many friends said they still couldn't distinguish or fully understand it. Today, let's not just play around. Let's use our down-to-earth dialect and talk about these two things to everyone. Especially for friends who make partitions for public restrooms, don't listen or buy the wrong one, otherwise it won't take long for problems to occur. It's both expensive and troublesome, and the loss is not worth it.

　　咱先说好，咱今儿个就唠实在的，不扯那些专业术语，就把这俩板儿的区别，掰扯得明明白白，让大家一听就懂、一看就会辨。首先呢，咱从它的材质上来说，这可是最核心的区别，俩板儿的“底子”，那根本就不是一回事儿。

　　Let's talk about it first. Today, let's be honest and not delve into technical jargon. Let's make the difference between these two boards clear and understandable, so that everyone can understand and distinguish them at a glance. Firstly, in terms of its material, this is the most fundamental difference. The "foundation" of the two boards is completely different.

　　富美家抗倍特板，用的那都是实打实的好料，清一色进口的牛皮纸和色纸，再搭配上酚醛树脂和3D清原树脂，搁高温高压底下压制而成的，每一层都压得特别紧实，没有一点偷工减料[4]。大家可别小看这材质，这就是它耐用、防水的关键，毕竟公共卫生间天天潮乎乎的，来往人又多，材质不好的话，根本扛不住常年的折腾。

　　Fumeijia's anti double special board is made of solid and high-quality materials, using imported kraft paper and colored paper, combined with phenolic resin and 3D virgin resin, and pressed under high temperature and pressure. Each layer is pressed tightly without any cutting corners. Don't underestimate this material, this is the key to its durability and waterproofness. After all, public restrooms are damp every day and have a lot of people coming and going. If the material is not good, it cannot withstand years of turmoil.

　　再看那二代板，可就不一样了，材质差得不是一星半点儿。它用的不是进口牛皮纸，而是所谓的白金质木质纤维，说白了，跟咱平时见的木屑压合到一块儿的板子差不多，搭配的也是普通的尿醛树脂[1]。虽说也是高温高压压制，但原材料的档次差了一大截，底子就不行，后续的性能，自然也跟不上富美家抗倍特板。

　　Looking at that second-generation board again, it's different. The material is not just one and a half stars inferior. It doesn't use imported kraft paper, but so-called white gold wood fibers. In other words, it's similar to the boards we usually see made by pressing wood chips together, and it's also paired with ordinary urea formaldehyde resin. Although it is also subjected to high temperature and high pressure pressing, the quality of the raw materials is significantly inferior, and the foundation is not good. As a result, the subsequent performance cannot keep up with Fumeijia's anti double special board.

　　说完材质，咱再说说第二点，从它俩的外观和横切面来看，一眼就能分清好坏、辨出高低。大家可以仔细瞅一瞅，富美家抗倍特板的横切面，是实打实的实心儿，没有一点毛细孔[3]。为啥能做到这样？因为它的密度特别高，大概在1400左右（单位：kg/m?）[5]，密度一高，吸水率就特别低，所以它的防潮防水性能，那真是顶呱呱，没话说。

　　After discussing the materials, let's move on to the second point. From their appearance and cross-section, it's easy to distinguish between good and bad, and to distinguish between high and low. You can take a closer look at the cross-section of Fumijia's anti double special board, which is solid and without any capillary pores. Why can we do this? Because its density is particularly high, around 1400 (unit: kg/m)? ）[5] When the density is high, the water absorption rate is particularly low, so its moisture and waterproof performance is really top-notch, there's nothing to say.

　　不管是商场、办公楼的公共卫生间，还是学校、医院的卫生间，用富美家抗倍特板做隔断，根本不用担心它吸水、变形，哪怕常年处于潮湿环境，用个十年八年，依旧是好好的，不用频繁维修、更换。

　　Whether it's public restrooms in shopping malls, office buildings, or bathrooms in schools and hospitals, using Fumeijia anti double special panels as partitions, there's no need to worry about it absorbing water or deforming. Even if it's in a humid environment all year round, it's still in good condition after ten or eight years of use, without frequent maintenance or replacement.

　　可那二代板就不行了，它的密度特别低，大概只有800左右，比富美家抗倍特板差了快一半[1]。密度低，横切面上就容易有细小的孔隙，吸水率自然就高。要是把它用在公共卫生间这种高频使用、又潮湿的空间里，用不了多久，就容易出现吸水膨胀的情况，要么鼓包、要么变形，严重的还会开裂，到时候还得拆了重新装，别提多麻烦、多费钱了。

　　But the second-generation board is not good, its density is particularly low, only about 800, which is almost half worse than the Fumeijia anti double special board. Low density makes it easy to have small pores in the cross-section, resulting in high water absorption rate. If it is used in a high-frequency and humid space like a public bathroom, it will not be long before it is prone to water absorption and expansion, either bulging or deforming, and in severe cases, cracking. At that time, it will have to be disassembled and reinstalled, which will be very troublesome and expensive.

　　咱再跟大家说句实在的，这俩板儿，名字看着差不多，都带个“抗倍特”的名头，可实际上，差别大得很。就跟奥迪和奥拓似的，名字就差俩字，看着都是车，可品质、性能，根本就不是一个档次的[1]，用在卫生间隔断上，体验感更是天差地别。

　　Let's be honest with everyone again, these two boards may seem similar in name, both with the prefix "anti beta", but in reality, the difference is very big. Just like Audi and Alto, the names are only two words apart. They both look like cars, but their quality and performance are not of the same level. When used on bathroom partitions, the experience is even more different.

　　好多朋友买的时候，就图个便宜，觉得名字差不多，性能也差不到哪儿去，殊不知，这一贪便宜，就踩坑了。尤其是做公共卫生间隔断，本来就是图个省心、耐用，要是因为图便宜选了二代板，后期频繁维修更换，反而花更多的钱，还影响使用体验。最后再叮嘱大家一句，选板材可别被名字忽悠了，分清这俩板儿的区别，才不会吃亏！

　　Many friends buy it just for the sake of cheapness, thinking that the name is similar and the performance is not much worse, but little do they know that this greed for cheapness has led to falling into a trap. Especially when making partitions for public restrooms, the original intention is to be worry free and durable. If you choose second-generation boards because they are cheap, frequent maintenance and replacement in the later stage will actually cost more money and affect the user experience. Finally, I would like to remind everyone not to be fooled by the names when choosing boards. Distinguish between these two boards to avoid any losses!