富美家山东总代理浅谈复合墙板如何安装？_行业动态_新闻动态-山东创图建筑装饰工程有限公司

富美家山东总代理浅谈复合墙板如何安装？

来源：https://www.fumeijia.net/ 日期：2021-05-24 发布人：admin

复合墙板的安装方法是怎么样的，复合墙板为大家详解：

How is the installation method of composite wallboard

1.首先要看好设计图纸，根据放样的设计图纸来进一步确认木榫的尺寸和规格，然后再根据图纸来确定墙面弹线。

1. First of all, we should pay attention to the design drawings, further confirm the size and specification of the tenon according to the lofting design drawings, and then determine the wall snapping line according to the drawings.

2.钻孔固定需要使用60*M8的膨胀螺丝来做一个稳固，再使用12毫米的钻头来进行打孔，孔的宽度大概在45毫米之间。

2. For drilling and fixing, a 60 * M8 expansion screw should be used to make a stable hole, and then a 12mm drill bit should be used to drill the hole, and the width of the hole is about 45mm.
富美家山东总代理

3.将60*M8的膨胀螺丝放在孔里，如果施工现场已经进行到预埋阶段需要对隔墙板隔断轴线的位置放好定位线，然后固定好地面装饰表面水平和轴线基准点。

3. Put the 60 * M8 expansion screw in the hole. If the construction site has reached the embedded stage, it is necessary to set the positioning line for the partition axis of the partition board, and then fix the horizontal and axis datum points of the floor decoration surface.

4.同时还需要对复合墙板每个跨度之间尺寸复核，经过仔细确认好后再根据设计图纸立柱水平间距，再对预埋件进行防锈处理的分布，符合要求后使用膨胀螺丝来稳固。

4. At the same time, it is also necessary to recheck the size of each span of the composite wallboard. After careful confirmation, according to the horizontal spacing of the columns in the design drawings, the distribution of the embedded parts should be antirust treated. After meeting the requirements, expansion screws should be used to stabilize them.

富美家山东总代理复合墙板在进行安装的时候有许多小细节要处理，不过不用太担心，因为在进行隔墙板隔断施工的时候隔墙板厂家都会配置熟练的操作工到场。

There are many small details to deal with during the installation of fumeijia Shandong general agent composite wallboard, but don't worry too much, because during the partition board construction, the partition board manufacturers will be equipped with skilled operators.

上一篇：酒店为什么要饰面防火板来做表面装饰处理！ 下一篇：造成外墙保温装饰板老化的因素有哪些？

分类导航

产品中心

联系我们

成功案例

联系我们

新闻动态

联系我们

热门产品推荐

相关新闻